Inconel 600 Bolts Nuts

M5 M6 M10 Alloy 600 Fasteners manufacturer in India, UNS N06600 Stud Bolt Dimension

Inconel 600 Bolts Nuts are used in applications that are prone to chloride ion corrosion stress cracking and caustic corrosion. The material is subject to concentrated alkalis in high temperatures but it is excellent against steam mixtures, carbon dioxide and exhaust gases. Navstar Steel is a leading supplier and manufacturer of the Inconel 600 Bolts Nuts in different dimensions and types.

Inconel 600 Bolts Nuts

Alloy 600 Fasteners

UNS N06600 Stud Bolt

Inconel 600 Screws, ISO4017 Alloy 600 Bolts, ASME SB166 Alloy 600 Washer Price in India.

The bolts and nuts belong to the ASTM B166 specification which specifies the hot and cold finished Inconel 600 bars, rods bolts and nuts. The standards vary as DIN, ASTM, BS and all other international standards as well. The Inconel 600 Fasteners can differ in length from custom length and 3mm through 200mm and the sizes can also range from M3 to M56 and 3/6 inches to 2 inches.  There are different types of bolts and nuts such as the T nuts, panel nuts, coupling nuts and the square bolts, Hex bolts, counter sunk bolts in the Alloy 600 Fasteners.

Table of Contents

• Specification Format of Alloy 600 Fasteners
• Dimension Schedule of UNS N06600 Stud Bolt
• Composition Chart of Inconel 600 Screws
• Most Commonly Used ASME SB166 Alloy 600 Washer Types
• Equivalent Grades of Inconel 600 Hex Bolts
• ASTM B166 UNS N06600 Threaded Rod Weight In Kg
• Mechanical Analysis of Alloy 600 Bolts
• Price Table of Inconel 600 Din 2.4816 Square Bolt/Nut

The material has high yield strength of 310MPa minimum and high tensile strength of 655MPa minimum. The different types of fasteners are used in different application circumstances. Some are threaded and some are not. Some of them are intended for heavy applications and some are intended for filling in the gaps. The UNS N06600 Stud Bolt is made up of an Inconel 600 rod that has threads on both ends. The studs are used to connect components with female threads at both ends usually. The Inconel 600 Screws are used without bolts. Where the surface of the fitting has to be flat and nuts cannot be used, the screws come in handy. They can be used to tighten components together without the use of bolts and nuts or welding. The Alloy 600 Bolts are strong, corrosion resistant and ductile. They are also hard enough to withstand the stress in the applications. Therefore they are used in chemical, food processing, heat exchanger and condenser applications. Please contact us for more fasteners like the ASME SB166 Alloy 600 Washer and their pricing information.

Specification Format of Alloy 600 Fasteners

Specifications	ASTM B 166 ASME SB 166
Standard	DIN, ASTM, BS and all International Standards
Length	3 mm to 200 mm
Size	M3 – M56 | 3/6″ to 2″ | Custom Sizes
Screw Type	Inconel 600 Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc.
Bolts Types	Inconel 600 Hex Head Bolts, Hex Bolts, Square Bolts, Eye Bolts, T Bolts, U Bolts, Lag Bolts, Counter sunk Bolts etc.
Washer Types	Inconel 600 Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc.
Studs Types	Inconel 600 Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc.
Nut Types	Inconel 600 Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc.

Wholesale M1.6~M12 Inconel Gost МНЖМц 28-2,5-1,5 Hex Bolts, ASTM B166 UNS N06600 Threaded Rod, Check Inconel 600 Socket Head Cap Screws Dimension

Dimension Schedule of UNS N06600 Stud Bolt

Bolts Diameter	D	F			C		H
	Body Diameter	Width Across Flats			Width Across Corners		Height
	Max	Basic	Max	Min	Max	Min	Basic	Max	Min
1/2	0.515	7/8	0.875	0.850	1.010	0.969	11/32	0.364	0.302
5/8	0.642	1-1/16	1.062	1.031	1.227	1.175	27/64	0.444	0.378
3/4	0.768	1-1/4	1.250	1.212	1.443	1.383	1/2	0.524	0.455
7/8	0.895	1-7/16	1.438	1.394	1.660	1.589	37/64	0.604	0.531
1	1.022	1-5/8	1.625	1.575	1.876	1.796	43/64	0.700	0.591
1-1/8	1.149	1-13/16	1.812	1.756	2.093	2.002	3/4	0.780	0.658
1-1/4	1.277	2	2.00	1.938	2.309	2.209	27/32	0.876	0.749
1-3/8	1.404	2-3/16	2.188	2.119	2.526	2.416	29/32	0.940	0.810
1-1/2	1.531	2-3/8	2.375	2.300	2.742	2.622	1	1.036	0.902
1-3/4	1.785	2-3/4	2.750	2.662	3.175	3.035	1-5/32	1.196	1.054
2	2.039	3-1/8	3.125	3.025	3.608	3.449	1-11/32	1.388	1.175
2-1/4	2.305	3-1/2	3.500	3.388	4.041	3.862	1-1/2	1.548	1.327
2-1/2	2.559	3-7/8	3.875	3.750	4.474	4.275	1-21/32	1.708	1.479

Composition Chart of Inconel 600 Screws

Element	Content (%)
Nickel, Ni	72.0 min
Silicon, Si	.50 max
Carbon, C	.15 max
Sulphur, S	.015 max
Copper, Cu	.50 max
Iron, Fe	6.0-10.0
Manganese, Mn	1.00 max

Most Commonly Used ASME SB166 Alloy 600 Washer Types

Inconel 600 alloy steel m20 bolts and nuts

Inconel 600 DIN 933 Hex Head Bolts with Full Threaded

Inconel 600 601 UNS N06601 nickel alloy m20 bolts and nuts

Inconel 600 M8 Bolts stud Bolts hexagon head flange Bolts

Inconel 600 UNS N06600 DIN/EN 2.4816 12 point flange shoulder Bolts

Inconel 600 Nickel Alloy Steel Hex Flange Bolts And Nuts

alloy inconel 600 N06600 u Bolts

Inconel 600 Stud Bolts

Inconel 600 Cap Head Flange Bolts and Nut

Inconel 600 UNS N06600 EN 2.4816 Bolts nut Flat Washer M12

Inconel 600 Hex Bolts Nut Full/Half Thread

( Inconel 600 / 2.4816 UNS N06600 ) Hex Bolts with nuts and washers

Equivalent Grades of Inconel 600 Hex Bolts

Alloy	Common Name	Related Specification
		British	European	ASTM	UNS
Alloy 600	Inconel 600®	BS 3076 NA 14	2.4816	B166	N06600

OEM ODM Factory Nickel Alloy 600 Hex Head Bolt, Inconel 600 Coupling Nut suppliers in India. View Alloy 600 Nut Properties. High quality durable Inconel 600 Alloy Shoulder Nuts in Mumbai.

Mechanical Analysis of Alloy 600 Bolts

Density	8.47 g/cm3
Melting Point	1413 °C (2580 °F)
Tensile Strength	Psi – 95,000 , MPa – 655
Yield Strength (0.2%Offset)	Psi – 45,000 , MPa – 310
Elongation	40 %

Half Full Thread Inconel Alloy 600 Lock Nut, Inconel 600 Eye bolts DIN933 Hardware Fasteners, Nickel 600 U Bolts and T Bolts Weight Chart.

ASTM B166 UNS N06600 Threaded Rod Weight In Kg

Size (MM)	Weight per Metre	Size (UNC)	Weight per Mtr
M2	0.0187
M2.5	0.030
M3	0.044
M3.5	0.060
M4	0.078
M5	0.124
M6	0.177	¼”	0.194
M8	0.319	5/16”	0.323
M10	0.500	3/8”	0.469
		7/16”	0.650
M12	0.725	½”	0.896
M14	0.970	9/16”	1.096
M16	1.330	5/8”	1.342
M18	1.650
M20	2.080	¾”	2.021
M22	2.540	7/8”	2.756
M24	3.000	1”	3.638
M27	3.850	1 1/8”	4.545
M30	4.750	1 ¼”	5.718
M33	5.900	1 3/8”	6.842
M36	6.900	1 ½”	8.281
M39	8.200	1 5/8”	9.726
M42	9.400	1 ¾”	11.231
M45	11.000	1 7/8”	13.038
M48	12.400	2	14.741

Price Table of Inconel 600 Din 2.4816 Square Bolt/Nut

Inconel Alloy 600 Fasteners Price List	Price Per Pcs.
Alloy UNS N06600 Nuts price	USD $1.30
Inconel 600 Hex Bolts price	USD $6.50
600 Machine bolts price	USD $5.60
Inconel 600 Allen bolts price	USD $5.25