• Government recognize export houses
  • Call Now : +91 22 6610 9925
  • Call

    +91 22 6631 3977

  • Email

    navstarsteel@gmail.com

  • Address

    3/5, Sakar Bhavan, Ground Floor,
    6th Khetwadi Lane, Mumbai – 400 004, India.

Titanium Grade 2 Round Bar

Manufacturer of ASTM B348 Gr 2 Rods, Titanium Gr 2 Hex Bars

Titanium Grade 2 Round Bar is made up of a commercially pure titanium grade with over 99% titanium in it. The material comes under the specification ASTM B348 and the dimensions are according to the standards EN, DIN, JIS, ASTM, BS, ASME and AISI. Navstar Steel is a leading manufacturer and supplier of the Titanium Grade 2 Round Bar products in various scales and types. The width of the bars range from 5mm to 500mm with the diameters ranging from 0.1mm to 100mm.

Buy 2mm, 3mm, 6mm Titanium ASTM B348 Grade 2 Flat Bars at lowest price in India, Check Specification of 16mm cold rolled Titanium UNS R50400 Forged Bars

The ASTM B348 Gr 2 Rods can vary in length ranging from 100mm to 3000mm in general but lengthier bars are also produced and per customer requirements. The bars have different tolerance levels denoted as H8 through H13 and K9 through K12. There are different forms of the bars such as the Titanium Gr 2 Hex Bars, round bars, square, rectangle, billet, ingot, forging and more. There are also different finishes to these bars such as black, bright polished, rough turned, No 4 finish, matt finish and BA finish. 


The Titanium ASTM B348 Grade 2 Flat Bars have a composition of titanium, carbon, iron, hydrogen, nitrogen and oxygen. This composition is responsible for the extreme mechanical properties of the material. The material has 344MPa minimum tensile strength and 275MPa minimum yield strength. The Titanium UNS R50400 Forged Bars also have 1665 degrees Celsius melting point. This extreme melting point provides the material the space to dominate high temperature applications as well high strength applications. The applications of the Grade 2 Ti Square Bar as well as the others include power generation, petrochemicals, gas processing, heat exchangers, pulp and paper industry, condensers and specialty chemicals. Please contact us for more information on the products and pricing.

Material Specification Chart of ASTM B348 Gr 2 Rods

Specifications Chart ASTM B348/ ASTM SB348
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size in mm
5 mm To 500 mm
Diameter in mm 0.1 mm to 100 mm
Length in mm 100 mm To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Titanium Gr 2 Hex Bars Sizes In Mm

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12mm 0.271 0.889 40mm 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13mm 0.318 1.043 1-3/4" 3.712 12.179
14mm 0.368 1.207 45mm 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15mm 0.424 1.391 48mm 4.330 14.205
5/8" 0.473 1.551 50mm 4.698 15.414
16mm 0.481 1.578 2" 4.848 15.906
17mm 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18mm 0.610 2.001 60mm 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083

Composition Chart of Titanium ASTM B348 Grade 2 Flat Bars

Grade C N O H Ti Fe
Titanium Gr 2 0.10 max 0.03 max 0.25 max 0.015 max bal 0.30 max

UNS R50400 Forged Bars Mechanical Properties Chart

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20%

Various Types Of Grade 2 Ti Square Bar

Titanium Grade 2 Round Bar1

4 inch Titanium GR 2 Round Bar

Titanium Grade 2 Round Bar2

Titanium Grade 2 Bars 6-20 m

Titanium Grade 2 Round Bar3

3 meter, 14 Inch, ASTM B348 Gr 2 Rods

Titanium Grade 2 Round Bar4

3 meter, 6 meter, Titanium Gr 2 Round Bars

Titanium Grade 2 Round Bar5

CP Titanium Grade 2 Round Bars, Size/diameter: >4 inch

Titanium Grade 2 Round Bar6

50mm To 5 Meter Long Silver Titanium Grade 2 Round Bars

Hot Rolled Ti Alloy Grade 2 Black Bar Equivalent Grade

STANDARD WERKSTOFF NR. UNS
Titanium Grade 2 3.7035 R50400

Physical property of Titanium Gr 2 Threaded Bar

Density: 0.163 lbs/in3, 4.51 g/cm3

Mean Coefficient of Thermal Expansion, in/inl° F (mm/ml° C):
70 - 212 ° F (20 - 100 ° C): 4.78 x 10-6 (8.6)

Thermal Conductivity: BTU-in/h-ft-° F (W/m-° K):
At 70 ° F (21 ° C): 114 (16.4)

Modulus of Elasticity, ksi (MPa)
15.2 x 103 (105 x 103) in tension

Melting Point: 3040 ° F (1670 ° C)


Grade 2 Ti Square Bar, Titanium Grade 2 UNS R50400 Threaded Bar. Check Titanium Alloy Grade 2 Bars Sizes, Grade 2 Titanium Alloy Triangular bar Weight Chart

Thickness Chart Of Titanium Alloy Grade 2 Bars

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3 0.017 0.055 20 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4 0.030 0.098 24 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25 1.180 3.871 4" 19.306 63.340
5 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26 1.271 4.170 4-1/2" 24.4487 80.340
6 0.068 0.223 27 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7 0.091 0.298 30 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8 0.120 0.398 32 1.894 6.314 6-1/2" 51.093 167.630
9 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35 2.390 7.553 7-1/2" 68.226 225.000
10 0.189 0.620 36 2.438 7.999 8" 77.586 254.55
11 0.228 0.748 38 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12 0.271 0.889 40 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13 0.318 1.043 1-3/4" 3.712 12.179
14 0.368 1.207 45 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15 0.424 1.391 48 4.330 14.205
5/8" 0.473 1.551 50 4.698 15.414
16 0.481 1.578 2" 4.848 15.906
17 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18 0.610 2.001 60 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083

Grade 2 Titanium Alloy Triangular bar Tolerance Standard

Tolerances for ot Rolled grade 2 ti Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
milimeter milimeter
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250

Tolerances of Turned ASTM B348 grade 2 titanium Round Bar (BS 970-3)

Turned titanium grade 2 round bar Tolerances
grade 2 titanium round bar diameter and sizes Permitted variation
milimeter milimeter
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
+ 0 to - 0.160
+ 0 to - 0.185
+ 0 to - 0.210
+ 0 to - 0.230
+ 0 to - 0.250

Tolerances of Precision ASTM B348 Gr 2 Rods (BS 970-3)

Precision Gr 2 Ti Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

Tolerance of Grade 2 Titanium Alloy Bright Round Bar (BS EN ISO 286-2 )

Cold Drawn grade 2 titanium round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER milimete
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0
Largest Independent Supplier of Titanium Werkstoff Nr. 3.7035 Polished Bar, View ASTM B348 Ti. Alloy Gr. 2 Cold Drawn Round Bar, Titanium Grade 2 Hexagonal Bar Price List.

Titanium Werkstoff Nr. 3.7035 Polished Bar Prices

Size Price in India
0.125" Ti Grade 2 Round Bars (10"-12") $3.43
0.158" Ti Grade 2 Round Bars (10"-12") $5.47
0.1875" Ti Grade 2 Round Bars (36") length $23.82
0.25" Ti Grade 2 Round Bars (72") length $63.38
0.3125" Ti Grade 2 Round Bar (12") length $17.91

Titanium Gr 2 Round Bar Finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled
Fast Delivery of Grade 2 Alloy Steel Hollow Bars in India. Check ASME SB348 Titanium Gr 2 Rectangular Bar, Check AMS 4921 Titanium Alloy Grade 2 Rod Dimension & Stock

Titanium Grade 2 Hexagonal Bar Stockist

ASTM B348 Alloy Gr 2 Hex Bar Polished grade 2 titanium Hexagonal Bar
ASTM B348 Alloy Gr 2 Rectangular Bar Titanium WERKSTOFF NR. 3.7035 Threaded Bar Black
Titanium UNS R50400 Round Bar grade 2 titanium Din 3.7035 Flat Bar
Titanium Grade 2 Bar Alloy grade 2 titanium Flat Bar Black
Alloy Gr 2 Rounds ASME SB 338 gr 2 Flat Bar Bright
Titanium Alloy Grade 2 Bright Bar Alloy Gr 2 Flat Bar Polished
Alloy grade 2 titanium Hex Bar Annealed Titanium WERKSTOFF NR. 3.7035 Cold Drawn Round Bar
ASTM B348 grade 2 titanium Round Bars Titanium Grade 2 Flat Bar stock
Titanium WERKSTOFF NR. 3.7035 Hex Bar Alloy Gr 2 Threaded Bar
Titanium Grade 2 Square Bar Polished Titanium UNS R50400 Bright Bar Hot Rolled
3.7035 grade 2 titanium Hex Bar Bright Alloy Gr 2 Alloy Hollow Bar
Gr 2 Titanium Rectangular Bar Annealed Alloy grade 2 titanium Polished Hex Bar
ASME SB 338 gr 2 Forged Bar Gr 2 Titanium Polished Bar
Alloy Gr 2 Alloy Rods UNS R50400 Titanium Flat Bar Cold Drawn
Alloy Gr 2 Square Bar Cold Drawn Titanium Grade 2 Bright Bar material
grade 2 titanium Rod Titanium UNS R50400 Flat Bar Annealed